|
Goto page :  1, 2 |
| Author | Message |
|---|
Sniper004
Private
Age : 16
Joined : 16 Mar 2008
Posts : 52
Location : Northern Michigan
|  Subject: Re: WELL VSR-10 MB03  Sun Mar 16, 2008 10:26 pm | |
| | listen kody any place any time any weapon, bring it. my good loyal freind |
|
  | |
sticks.13
Moderator
Age : 16
Joined : 09 Feb 2008
Posts : 454
Location : C-BUS, Ohio
| | Subject: Re: WELL VSR-10 MB03 Sun Mar 16, 2008 10:29 pm | |
| how bout me C-Bus next week?
sticks |
|
| | |
kkoerber
Private
Age : 16
Joined : 16 Mar 2008
Posts : 36
Location : Northern Michigan
| | Subject: Re: WELL VSR-10 MB03 Sun Mar 16, 2008 10:30 pm | |
| | i got a question what is the c-bus |
|
| | |
sticks.13
Moderator
Age : 16
Joined : 09 Feb 2008
Posts : 454
Location : C-BUS, Ohio
| | Subject: Re: WELL VSR-10 MB03 Sun Mar 16, 2008 10:31 pm | |
| columbus ohio AKA buckeye country
sticks |
|
| | |
kkoerber
Private
Age : 16
Joined : 16 Mar 2008
Posts : 36
Location : Northern Michigan
| | Subject: Re: WELL VSR-10 MB03 Sun Mar 16, 2008 10:37 pm | |
| oh thats about 446 miles from little town of eastport Michigan we call it East Port lol
FYI the last time i was in columbus i couldn't tell the differance from columbus and detroit |
|
| | |
Sniper004
Private
Age : 16
Joined : 16 Mar 2008
Posts : 52
Location : Northern Michigan
| | Subject: Re: WELL VSR-10 MB03 Sun Mar 16, 2008 10:38 pm | |
| | um i would but i have no car and i feel like myabe ill skip this butt kicking lol |
|
| | |
wf sniper
Corporal
Joined : 11 Feb 2008
Posts : 77
Location : GA
| | Subject: Re: WELL VSR-10 MB03 Mon Mar 17, 2008 3:08 pm | |
| man the vsr-10 looks just like the jg m700 which is about $75 my gun come apart the same way in the vid and the internals look the same
_________________
If you can read this thank a teacher if its in English thank a veteran.,USMC. |
|
| | |
kkoerber
Private
Age : 16
Joined : 16 Mar 2008
Posts : 36
Location : Northern Michigan
| | Subject: Re: WELL VSR-10 MB03 Mon Mar 17, 2008 7:02 pm | |
| | ya they look to be about the same but there are problebly some miner ticks |
|
| | |
sticks.13
Moderator
Age : 16
Joined : 09 Feb 2008
Posts : 454
Location : C-BUS, Ohio
| | Subject: Re: WELL VSR-10 MB03 Mon Mar 17, 2008 9:18 pm | |
| internaly the only difference is the type of materials that they two companies used, they can both use the same parts (standared TM VSR parts) and bodies. the only difference is one probably has a higher quality metal internally, or one has someones Logo, etc etc
sticks |
|
| | |
Seabass_9000
Moderator
Age : 24
Joined : 30 Jan 2008
Posts : 370
Location : Logan, OH
| | Subject: Re: WELL VSR-10 MB03 Wed Mar 19, 2008 10:25 pm | |
| I did the air brake mod on my Bar10... it is VERY easy in comparison to opening an AEG mechbox. Honestly, I wouldnt be scared to take it apart.
It is a bit louder now, but it also has a LOT more range and velocity to make up for that. If your enemies cant engage you at the same point you can engage them you sorta have the upper hand whether your replica is quiet or not.
That being said, my Bar10 is the G-Spec model and I made the mock surpressor functional.  It is literally twice as loud without the surpressor on it... so I guess I have the best of both worlds. 
_________________
Classic Army MG36 - 2500 rounds of pure fury.
Echo 1 Vector Arms AK - 400 FPS
JG Bar 10 G-Spec - 520 FPS
ICS M4 CQB - 325 FPS (Perfect for close encounters) |
|
| | |
Fox13
Corporal
Joined : 12 Feb 2008
Posts : 127
Location : Rainy Washington
| | Subject: Re: WELL VSR-10 MB03 Thu Mar 20, 2008 5:28 pm | |
| How did you make it functional?
_________________
The (not so) Lone Fox is Out
Hey got a question just throw me a PM (unless it is about the Bar 10 ...that word makes me shiver) |
|
| | |
Dark Knight
Corporal
Age : 27
Joined : 09 Feb 2008
Posts : 76
Location : Logan, OH
| | Subject: Re: WELL VSR-10 MB03 Thu Mar 20, 2008 8:28 pm | |
| do you plan on doing the teflon mod?
_________________
ECHO 1 M4 COMMANDO
VSR clone W/ Bushnell 3-9x32E ILL |
|
| | |
Seabass_9000
Moderator
Age : 24
Joined : 30 Jan 2008
Posts : 370
Location : Logan, OH
| | Subject: Re: WELL VSR-10 MB03 Thu Mar 20, 2008 10:00 pm | |
| Very simple: I took the inner tube out of the mock surpressor (comes with it) that is solid an approximately 8-9mm in diameter, then I took a dremel with a drill bit in it and ported the entire thing with some nice size holes. After this, I took some soft foam rings that just fit over it nice and snug and pushed them all together. Then I inserted it back into the mock surpressor and bingo it is literally twice as quiet with it on compared to when it is off. The FPS is still the same and it is still just as accurate... definitely quieter though.
Slacker has heard it, he can vouche for it.
I actually did use a little teflon as well while I had it all apart. I didnt really see a point as to wrapping the hop up chamber with it though... so I just did the tip of the air nozzle on the cylinder head. I think the biggest thing that would help is to get a good O-Ring that creates a better seal around the actual piston because with the standard O-ring if you pull back the piston a bit and put your finger over the air nozzle on the cylinder head, you can tell air is escaping from around the piston due to a poor seal.
_________________
Classic Army MG36 - 2500 rounds of pure fury.
Echo 1 Vector Arms AK - 400 FPS
JG Bar 10 G-Spec - 520 FPS
ICS M4 CQB - 325 FPS (Perfect for close encounters) |
|
| | |
Alabama_Sniper
Sergeant
Age : 13
Joined : 21 May 2008
Posts : 339
| | Subject: Re: WELL VSR-10 MB03 Wed May 21, 2008 5:41 pm | |
| | Use heavier BB's for accuracy |
|
| | |
Alabama_Sniper
Sergeant
Age : 13
Joined : 21 May 2008
Posts : 339
| | Subject: Re: WELL VSR-10 MB03 Wed May 21, 2008 8:24 pm | |
| | Mine is 10 pounds but I like it because it let's me know I got something on my back |
|
| | |
Alabama_Sniper
Sergeant
Age : 13
Joined : 21 May 2008
Posts : 339
| | Subject: Re: WELL VSR-10 MB03 Wed May 21, 2008 8:40 pm | |
| | Who Ho go L-96 UTg |
|
| | |
|
