G&G problem(S)

The Gun Feeds right when it works its extremely accurate but there is problems. about every 300 or so shots it seizes up it's not the fuse the guns not jammed and the motor doesn't make a sound when i fully charge my battery even though i have an 8.4 v intellect 1600 MAH battery so it is more than 80% full and then i make radical adjustments to the screw like thing on the pistol grip under the motor then it starts working again........ for about 300 shots ive tried multiple batteries also if this helps when it does work it's really high pitched and heats up fast

Yup i got your problem.

What happens, is the little screw that you are turning to adjust the motor height, isn't tight enough in it's casing

every time the motor turns, instead of staying still and holding the motor in its proper place, it spins with the motor, and makes it go higher and higher until it can not turn any more.

I highly suggest getting a new pistol grip and motor plate.
This will fix your issue once you properly adjust it.

Ok Ill try that could i just get a new motor floor plate or do i have to get that and the pistol grip to work

The floor plate is all you need, but you need to find the specific kind or else it will not work.

Thanks took it to local tech he said it was that problem combined with a short my gun is good and healthy again

Good to know I helped =] have fun playing