What to do, What to do?

I am unsure of wether I should go for it, and by a zero trigger for my bar 10 project, or to just replace the sears, I am skilled with aeg gearboxes, and hop ups, so I have an understanding of the small pieces found in airsoft mechanisms, but I have never opened up a VSR trigger box to replace sears. Tim from ASGI says the sears are to only needed part for trigger box upgrades for VSR's, but the Zero Trigger will be a "for sure" piece of art, or just a waste of money considering that you only need 30 dollar sears rather then the 189 dollar Zero trigger. I don't know what to do.

Just get the trigger sear and replace it cause taking apart a BAR 10 is way easier than any AEG in my opinion

Ya im good with snipers, but can't do crap with a aeg

its a little tricky but after 3 or 4 times i got the hang of it......i ca tear down my bar1o in like 3 minutes flat....

also, should I get an AEG style hop up, or stick with the stock hop up and buy only BAR 10 style barrels?

the stock hop up is pretty good, I would go with a barrel.

you need a vsr10 type barrel and hop up...

Well, It has a VSR hop up and I don't want to be limited to only the sniper style barrels, therefore, I could purchase the Laylax Neo chamber hop up, which takes AEG style barrels, and buckings.

whats so bad about sniper style barrels and hop ups? ; (

They are VERY expensive, along with VSR buckings, which are 20 dollars alone. Therefore, by buying the AEG style hop up you cut down on barrel cost, and bucking cost just by buying the new chamber for 65 dollars.

$50 for a KM Head TBB is cheap..AND its a 6.01....