Deepfire 6.04 or 6.02

http://www.airsplat.com/Items/AC-UPI-DF-CPB04.htm 6.04
http://www.airsplat.com/Items/AC-UPI-DF-CPB17.htm 6.02
I was wondering which would be better. You know that a 6.02 would have better accurcy but how much would better would it be to a 6.04. Is it worth to have to clean it every week and have better accuracy or clean it every month and less chance of jams (I use crosman perfects they are 5.97 i belive with +/- .02 that may be wrong.)

I think that the difference is that one is bigger/longer. As for the effectiveness against each other, this I do not know.

You need to get the barrel that matches the length of the barrel already installed. The purpose of a tightbore isn't so much accuracy as it is FPS. If you want better accuracy, invest in a nice high-end hop, but the TB doesn't hurt either. more FPS.

It is the right lenth bar 10 and vsr 10 are the same lenght.

A tuning Barrel is only as good as the BB´s that you are using, if you are using Perfect´s and you are happy with thier performance, installation of a Tight Bore tuning barrel will increase your Accuracy.

The combination of a correctly adjusted HOP-UP, FPS and BB weight are what influences your Accuracy, a tighter bore will allow the BB to carry more energy with it as it goes down range, providing a better and more stable flight path.

As far as maintainence goes, you should really get into the habit of cleaning the barrel after every game, or after any long period of shooting.

Don't worry about length, they are both 430mm.

The FPS is your main boost. For accuraccy get a firefly hard hop rubber (works wonders) and for range do the biro tube mod (i tweaked the design a bit by cutting a V into it so the V-hop is still worth using.)

Jim

Thank you, also Jim i have not taken my bar apart to the hopup yet so is there only certain ones that will work or do you have to cut it?

You want to buy the firefly hard hop for VSR. It's a simple process to swap it out. Just ask and I'll link you to a guide.

Also I clean my barrel after EVERY skirmish so I'd suggest doing that whichever barrel you have.

Any other questions don't hesitate to ask.

Jim

Ok then ill get a 6.02. I have the time to just not the suplies which I just got. The firefly hopup there is a certin one right. Also for right now this is the only thing I have found in stock. Kingarms one but is it better or worse then firefly.

Careful. VSR Pro Sniper/Standard has 430mm inner barrel wheras the G-Spec has 383 I believe.

I wouldn't know I've only used firefly and nineball.

Jim

The hopup chamer should not mader for g-spect or pro because both ends should be the same just one is longer. I haev the pro verion

Yeah that's true I thought someone said the barrels were the same length...

Jim

I did and is there anyware i can get both for under $55 (airplat)

Admin you can clsoe it now. I bought the 6.02 and am looking for the hopup also this is what I got:
Airsoft Pistol Tactical Leg Holster ACU EA 1 $8.95 $0.00 $8.95
Deluxe 3 Point Tactical Rifle Sling EA 1 $14.95 $0.00 $14.95
Deep Fire Barrel 6.02 VSR 10 VSR10 430mm EA 1 $32.95 $0.00 $32.95

Ill give a review of them when i get them

I hope you've not got a Gspec or you will have a nasty surprise with that barrel length!

Jim

All you have to do is drill a larger hole in the silencer. I think it took me +3 bit sizes from where the silencer diameter was at. don't just grab a bit that is 3 sizes to big, work your way up. The extra 120mm that you gain is well worth the effort. I have a 480mm 6.04 running through mine. I migth switch over to the madbull barrels here soon depending on funds.

Also if you want to know how to use AEG barrels with your standard hop PM me. Its actually a 5min job.

You will need new barrel spacers with that barrel. Just another heads up.

sticks

I have the pro not the G-spec version. I made sure I got the right one.

Make sure that tell us the results of the accuracy a fps when after you install the barrel.

I will also when I put the new barrel in I will fix the hopup. In the bar the right side of the hopup is a little bigger then the left so the bb curves right a little.

all you have to do is twist you barrel while its in the hopup. DO NOT TWIST ALOT, A FEW MM WILL FIX THE PROBLEM. This right hook is really the only flaw with the TM VSR hop-up. Of coarse the clones didnt invest into a way of fixing the problem so its there with all the clones.

sticks

Wait wouldn't that make it worse because the hopup would not fit in the hole.

No all that is doing is returning the hole in the barrel to the place where it should be. This is the only problem with H hops, if their a little bit tilted you get the right hook.

sticks

It's a V Hop not an H Hop on the vsr mate.

Lool sorry about that. I was looking up H hops for the M4 when I wrote this. Jim is right its a V hop-uo in the VSR. The whole barrel twisting this is still true though.

thanks Jim

sticks