UTG M24

Subject: UTG M24 Tue Nov 18, 2008 8:37 pm

I was wondering if it is possible to upgrade the UTG M24

Subject: Re: UTG M24 Tue Nov 18, 2008 8:52 pm

I didn't even know UTG had a M24 I thought it was only CA can you get me a link?
It probably is possible depending on what you want to upgrade.

Subject: Re: UTG M24 Tue Nov 18, 2008 9:16 pm

http://www.airsoftgi.com/product_info.php?cPath=154_157&products_id=1309 heres the link

Subject: Re: UTG M24 Tue Nov 18, 2008 9:40 pm

That's NOT a M24

this is an M24
http://www.airsoftpost.com/product_info.php?cPath=21_48&products_id=26850

but yes it should be upgradeable like most all guns just look for the barrel size on the internet then look for the same TB (tight bore) a spring all that you want and you should be able to.

Subject: Re: UTG M24 Tue Nov 18, 2008 10:25 pm

oh unfortunately i am only going up to around $250 for a gun

Subject: Re: UTG M24 Tue Nov 18, 2008 10:30 pm

Sean: http://www.airsoftgi.com/product_info.php?products_id=2690

Not the best ones possible but it'll do the trick.

Subject: Re: UTG M24 Tue Nov 18, 2008 10:38 pm

I'm going to get it

Subject: Re: UTG M24 Wed Nov 19, 2008 12:40 am

okay good luck don't screw up your gun.(I'm serious DON'T) but yeah that looks like a good kit.

Colonel Posts : 1410 Join date : 2008-05-21 Age : 29

Yeah and its pretty cheap too .

Subject: Re: UTG M24 Wed Nov 19, 2008 9:30 pm

You have a low budget?

Don't
Snipe
Yet

Subject: Re: UTG M24 Wed Nov 19, 2008 11:35 pm

TheJim is right it's going to take A LOT to upgrade the gun and stuff

Subject: Re: UTG M24 Thu Nov 20, 2008 12:05 am

Guys that kit is to upgrade the older rifles so they shoot as well as the new ones. Basically is all the guts of the gun(excluding the trigger assembly).

EdGi makes custom M324 parts, its just more hassle free to get a BAR though.

EdGi's website: http://edgicustom-usa.com/

sticks

Subject: Re: UTG M24 Thu Nov 20, 2008 2:10 am

thanks but i just looked at that sight how do you order the parts

Subject: Re: UTG M24 Thu Nov 20, 2008 5:34 pm

I would call them. If you don't mind waiting a few days I can made a tutorial on how to mod a VSR and UTG M324 hop-up to fit AEG barrels. It should save you around $40 to go with an AEG barrel.

sticks

Subject: Re: UTG M24 Fri Nov 21, 2008 12:41 am

If you think the video will help ill wait, Besides i don't have the money right now anyway.

Subject: Re: UTG M24 Fri Nov 21, 2008 5:25 pm

Ill post it when the friend comes over, it will most likely be instructions with some photos rather than a video. It takes alot of sanding...

sticks