G-Spec...or...No G-Spec?

i am getting a new sniper rifle and i am getting a TM VSR-10..only problem is i don't know weather to get the G-spec virson or not... whats the difference and witch is better?

No G-Spec. It's really not any different but the regular looks better. The TM VSR-10 Reg might have better performance but I don't really know. Youd have to ask someone that's owned both.

OK as of now it is the BAR-10 vs. the BAR-10 Gspec...now i have a few questions...they both have the same internals right? if so I'm leaning towards the G-Spec because i thinks it looks more tactical and the suppressor works...as im told

get the non g-spec the inner barrel is longer

ya that's what I thought.

but they come to the same length with the suppressor right?... and what can the Teflon and air brake mod guarantee for FPS?

The airbrake mod adds about 60 fps to it.

OK so the Teflon will ad a little less than that i assume.......now what is the largest spring i can run with no other upgrades with out wreaking my gun and major wear? and i can do up to about $100 worth of upgrades not counting the spring and maybe a little more...and stock what upgrades should i do right off?

well here's what I'm getting
BAR 10 G-Spec
Laylax VSR10 Spring Guide(will it fit?)
Laylax 130SP Spring
Laylax VSR10 Damper(will it fit?)
Laylax VSR10 Piston Sear(will it fit?)
DIY Teflon mod
DIY Air brake mod
mags
and the stuff above labeled''will it fit'' i am asking this because it labeled only the the VSR10

The G-Spep has a 303mm Barrel, and a 200mm suppressor. The normal VSR has a 500mm barrel.

If you plan on using a longer barrel, you need to drill out the Bull barrel cap a little. Its no more than 3mm, once you have done that have at it!

Also, I would replace the piston if you plan on upgrading the spring. The piston is a plastic and you can wear the place where the piston sear catches the piston on a stock spring.

sticks

something like this i assume?

http://www.airsoftgi.com/product_info.php?cPath=31_201&products_id=4948

and do you think i should take my local guy up on putting these in or have airsoft gi do it?

i am thinking local guy because i know he is experienced and i also know him personally..and depending on how long it takes i could get him to do it for the fraction of the price!

Yep thats the piston, I'm going to grab one here in a few weeks.

sticks

I would also recommend a zero trigger.

i would get one but i can't for 2 reasons.. they are out of stock and it costs more than the gun itself!


* * * EDIT* * *


could i do thid to this? http://www.airsoftgi.com/product_info.php?cPath=154_157&products_id=842 it is a clone..of a clone

Don't they have them at airsoft atlanta.

i have pretty much the same question, what is the difference between G-spec and no G-spec. also is $135 too much for this with a 4x32 scope?

4x32 for $135? You can get a much higher magnification scope up to 50 magnification for around $100 for example the M1 scope shown here

https://www.evotactical.com/images/scopes/m1i.jpg

Sorry i meant is 135 too much for a no g-spec BAR-10 with the 4x32 scope all in a package

well thats means the scope is $25 and the gun is $115

but get it w/o the scope and buy one that would be best sited for you...as of now im useing a 3-9X50

thanks, also i have heard that the assembly is hard, do you know anything about this? i am really new to airsofting and don't really know how the scope magnification system works so could you explain the way they are classified/measured? thanks again.

yeah the 3-9x50's are awesome

well i don't own the gun and i don't think iwill be for a while...i just bought a custon pained PS3
so i can hep you