NEED HELP ON CYMA AK47

im not exactly new to airsoft (i am new to this forum thing though) but i really haven't used much AEGs i only have used bolt action or single action action sniper rifles and the problem i need help with is my ak 47 shoots to the right all the time.

what i have done:
1.)cleaned the barrel.
2.)made sure the bb's were clean.
3.)checked the mag well was clean.
4.)turned hop up off and on.

and yet the problem still persists i am confident that someone knows the solution to this problem and i'd be gratefull if anyone could help.

thankyou

The hop up might be broken. In this case you would need a new hop up and the know-how to install it. If you know people who are good at taking apart AEGs, have them do it.

really? aw that sucks i only just got it

if anyone else knows any other reason it could be failing on me could you please state as i would like to attempt all possible repairs to fix it.

thank you

your bucking, which is a little rubber ring in your hopup, might be torn. All you have to do is take out your barrel assembly, remove the barrel, and replace the bucking. Its a pretty easy fix.

thats 2 saying the hop up, how much will that cost?

um, a new bucking will cost you anywhere from $6-10, its a cheap fix.

Just replace the bucking it will keep the expenses cheap. And if you have been playing in the cold these past few weeks, the bucking rubber gets extremely brittle. Like keeping lips from chapping, you just smear a little vaseline on the outside of the bucking to seal in the moisture and keep things flexible.

ok thank you; you lot i will get on it as soon as i can and will say if it has worked or not fingers crossed it works

Your barrel is twisted, which is causing the nubbing to contact the left side of the BB only. Take your barrel out of your hop-up and re-install it properly.

sticks

so thats another thing that could be wrong?

My echo came that way, I had a used VSR come that way. By re-installing the barrel/rubber correctly I fixed both problems...

The worst you could do is find its something more serious, ie torn bucking/broken hop-up.... But I would try this first, its cheaper.

sticks

cheers and will get right on it but problem is im no good with aegs so i wouldnt know how to take it apart to get to the barrel, is there a topic that explains it or a youtube vid so i can be on safe side?

is it an lpeag? if so the barrel might be fused with the gearbox.

whats a lpeag?

ok i have done what you lot said and i have taken it down and found that the barrel is bent quite a bit anyone know how this could have been done as its the brass barrel thats bent

Oh "Watch your language", that sucks balls. It could have bent because the outer barrel assembly was incorrectly mounted.

You will be needing a new barrel fo sho.

how much will the cheapest be? and is there no other way fixing it?

A new barrel will go for around $30 and then some if you plan to use the opportunity to put in a TBB. (6.03 works best, fyi) You can get a madbull "black python" TBB AK length for about $30.

But first I would try finding out what could have warped your barrel.

whats tbb? and i think its when i lent it to my friend and he dropped it and it hit a log but still that wouldnt do it would it? its a tough outer barrel on it

COMMIE!
And If the outer isn't bent the inner shouldent be bent, manufacturer warranty?

I am not for sure, it could have even been a freak accident with the cold and your friend dropping it.

A TBB is a Tighter Bore Barrel.

lol not the first time someone has called me that lol

eh... could do i suppose but why do aegs have to cuase so much hassle.


the barrel is bent in the middle and at the end so i don't know... firing of the weapon couldnt of done it could it?

No that is definitely the result of droppage.

AEG's are clockwork. They require maintenance but if properly cared for, they will never fail you on the field.

lone... whats his religeous views got to do with political systems lol?

but chhers for defence lol...

ok then, do u have any tips for a guy with his first aeg?