Would you like to react to this message? Create an account in a few clicks or log in to continue.


 
HomeSearchLatest imagesRegisterLog inThe Airsoft Sniper

 

 Cleaning

Go down 
+2
kkoerber
Tasada
6 posters
AuthorMessage
Tasada
Corporal
Corporal
Tasada


Posts : 104
Join date : 2008-11-16
Age : 29
Location : Manitou Springs, Colorado

Cleaning Empty
PostSubject: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 11:07 am

All right, call me a noob here, I don't care, what would be the best way to clean my barrel. Do I need a special soft cleaning rod or will any do? Will extra long pipe cleaners work? Is the barrel accessable by the bore? (In which case I would use a bore snake)

I know I should apply a little bit of silicon spray to the cleaning apparatus for lubrication and to help get dirt out but if you could just tell me what you guys use that'd be great.

Also my bolt came greased and now that grease is getting thin. What kind of lube should I use there?
Back to top Go down
kkoerber
Major
Major
kkoerber


Posts : 747
Join date : 2008-03-16
Age : 32
Location : Northern Michigan

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 11:10 am

be for you clean make sure to turn your hop-up off all the way or els you will brake it. i use the cleaning rod from a real gun and cleaning patches... you can but thease things at like any sore that sells guns or hunting stuff....after you clean it you may want to lube your gun with some silicone lub.


Last edited by kkoerber on Mon Nov 17, 2008 11:14 am; edited 1 time in total
Back to top Go down
Sniper004
Sergeant
Sergeant
Sniper004


Posts : 323
Join date : 2008-03-16
Age : 33
Location : Northern Michigan

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 11:12 am

turn ur hop up OFF, then i just use a brass cleaning rod with some gun cleaning patches and a bit of silicone lube. then i shoot it about 30 times and let in sit with the barrel angled toward the ground.
Back to top Go down
Tasada
Corporal
Corporal
Tasada


Posts : 104
Join date : 2008-11-16
Age : 29
Location : Manitou Springs, Colorado

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 11:21 am

Yeah but you don't spray the silicone directly down the barrle right? I've heard you should only use a tiny bit of silicone spray on your cleaning apparatus.

If you spray it down the barrel it will eventually corrode it.
Back to top Go down
kkoerber
Major
Major
kkoerber


Posts : 747
Join date : 2008-03-16
Age : 32
Location : Northern Michigan

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 11:35 am

i spray mine right down the barrel because thats what it said to do on the can but i think that i doesnt hurt anything but don't use alot.........
Back to top Go down
Sniper004
Sergeant
Sergeant
Sniper004


Posts : 323
Join date : 2008-03-16
Age : 33
Location : Northern Michigan

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 11:50 am

i don't sparay directly down the barrel.. just because i think it hurts the gun. sparya the lube on the cleaning cloth...
Back to top Go down
N.O.Saints
Private
Private



Posts : 26
Join date : 2008-08-18

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 7:53 pm

I know this post is about cleaning a sniper, but I was just wondering when you clean an AEG should the hop-up be turned off like on a sniper?
Back to top Go down
Alabama_Sniper
Colonel
Colonel



Posts : 1410
Join date : 2008-05-21
Age : 29

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 8:14 pm

Ok one word silicon , use it and a big long plastic rod , usually this comes with the airsoft gun .
Back to top Go down
http://www.freewebs.com/alabamaairsoft
Tasada
Corporal
Corporal
Tasada


Posts : 104
Join date : 2008-11-16
Age : 29
Location : Manitou Springs, Colorado

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 8:32 pm

Yea my sniper didn't come with the rod. Plus I don't entirely think that plastic would be a good material for cleaning a barrel.
Back to top Go down
Alabama_Sniper
Colonel
Colonel



Posts : 1410
Join date : 2008-05-21
Age : 29

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 8:47 pm

Plastic or steel , it doesn't matter , just as long as it does the trick .
Back to top Go down
http://www.freewebs.com/alabamaairsoft
Tasada
Corporal
Corporal
Tasada


Posts : 104
Join date : 2008-11-16
Age : 29
Location : Manitou Springs, Colorado

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 8:51 pm

Gotcha
Back to top Go down
Alabama_Sniper
Colonel
Colonel



Posts : 1410
Join date : 2008-05-21
Age : 29

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 8:52 pm

But I do see where you are coming from , plastic rods could break off into the barrel and become caught , but I don't think that it will and is very unlikely .
Back to top Go down
http://www.freewebs.com/alabamaairsoft
Tasada
Corporal
Corporal
Tasada


Posts : 104
Join date : 2008-11-16
Age : 29
Location : Manitou Springs, Colorado

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 9:13 pm

Still you guys fail to address my 2nd question. What lube should I use on my bolt?
Back to top Go down
Alabama_Sniper
Colonel
Colonel



Posts : 1410
Join date : 2008-05-21
Age : 29

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 9:22 pm

Gun grease , made for airsoft guns .
Back to top Go down
http://www.freewebs.com/alabamaairsoft
kkoerber
Major
Major
kkoerber


Posts : 747
Join date : 2008-03-16
Age : 32
Location : Northern Michigan

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeMon Nov 17, 2008 9:30 pm

i use silicone because it says that you can use it on any part of the gun (on my can) and i would have the hop-up off on what ever gun you have when you put a cleaning rod down it.
Back to top Go down
slob212
Moderator
slob212


Posts : 1489
Join date : 2008-09-05
Age : 113
Location : Germany

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeWed Nov 19, 2008 3:44 am

A quick shot of Silicon spray down the Barrel is fine, a 1 second shot will provide you with more than enough to lubricate the entire barrel, when using a cleaning rod, remember to ``TURN´´ the patch down the barrel, and Turn it back out. Stay away from petrolium based oils for barrel cleaning ( WD-40, 3 in 1....). Petrolium based oils will destroy the Hop-Up rubber most ricky tick !!

For bolt Grease I recommend using Robbe Presision Grease, is also Silicon/Teflon Based, IMHO, this stuff is made for AirSoft !!! Gas, Spring, AEG, I use this grease on all my guns, and on all the guns that I work on.

http://www.helibits.com/customer/product.php?productid=16420&cat=0&page=1

You can pick it up in almost all hobby shops, and most definatly in any RC Shop.
Back to top Go down
Tasada
Corporal
Corporal
Tasada


Posts : 104
Join date : 2008-11-16
Age : 29
Location : Manitou Springs, Colorado

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeWed Nov 19, 2008 11:17 am

But if you are just cleaning the barrel without dissasembling the rifle wouldn't you just be shoving all of the dirt into the back of the barrel?
Back to top Go down
slob212
Moderator
slob212


Posts : 1489
Join date : 2008-09-05
Age : 113
Location : Germany

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeWed Nov 19, 2008 3:54 pm

Thats why you turn the Cleaning pad, not shoving it in.
Back to top Go down
Tasada
Corporal
Corporal
Tasada


Posts : 104
Join date : 2008-11-16
Age : 29
Location : Manitou Springs, Colorado

Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitimeWed Nov 19, 2008 7:45 pm

Gocha
Back to top Go down
Sponsored content





Cleaning Empty
PostSubject: Re: Cleaning   Cleaning Icon_minitime

Back to top Go down
 
Cleaning
Back to top 
Page 1 of 1
 Similar topics
-
» Cleaning the barrel
» Cleaning out the unanswered area
» Cleaning/Restoring old knife
» Drakes Closet cleaning extravaganza
» Cleaning house - Getting Rid of the Unused Gear (Financing UAV Project)

Permissions in this forum:You cannot reply to topics in this forum
 :: Airsoft Allies - Site Discussions :: Ask a Pro-
Jump to: