springs

Might be a dumb question but is 300% spring stronger then a 380%

No it is not but don't install either unless the internals in your gun are upgraded also otherwise you may bust up your gun.

ok thanks.....im trying to find an alrite spring for my L96...i have a 300% but it was to hard to pullback the bolt...and i was wondering if the 380% was stronger or less

Ya it is stronger but you may be able to get other internal upgrades to make the pull easyer but i don't deal with sniper rifles to much so i couldent help alot with it.

you would need to pretty much completely change out all your internals for a 380 and it will probably be harder to cock if you have trouble with a 300.

Just about any spring that will increase your power you will need upgraded internal. I would recomend a zero trigger, teflon cylinder, new laylax cylinder head, tightbore barrel and maybe a 190 spring and also a new spring guide.
Airsoft atlanta has all of it.

http://www.airsoftatlanta.com/parts_vsr10.htm

look towards the middle.

thanks...I figured wat I want to do...switched the springs of my guns n got the hop up worked out perfectly

380% spring?

Ohhh never mind you were talking about those weird CA springs. A 190% should get you above 500FPS, thats really all I would go to considering there are no (or very little) high weighted BB's anymore.

sticks

If it is hard to pull get the pdi short stroke cylender head

no more high weighted BB's? the heaviest ive seen was .43 and also to make it pull easyier pull otu the bolt and lube it with silicone spray

Mgunner, I posted that awhile back when there really want any heavy BB's, well BB weighted above .3. Now Madbull and a few others have decided to jump on that idea.

sticks

oh sorry i didnt notice that it was a year old!