So as not to clog the main forums.

This is not a serious suggestion, this is in jest, I'm posting this at midnight, please treat it as such.

I'm looking for a new gun, but I want something that will give me an edge. Are these all compatible?

M-16

Internals:

spring
inner barrel (I'll cut it down to 509mm length to fit)

Toys:

Mag
Scope
a riser for the scope that gives me the option of flashlights later
4 of these
several of these
bayonet just in case
battery

I'm not sure I have enough internal upgrades to handle the battery and spring. What else will I need?

4 grenade launchers? thats a little exessive. other than that, sounds like a heck of an order!

i wouldnt get a rail mount launcher, but you can. and the magazine probably wouldnt work too well, id just get a bunch of high or mid caps.

Yeah, with 4 launchers, the box mag is kind of obligatory. And come on, 4 rails, 4 launchers? Makes sense to me. If I didn't need 4, I wouldn't use RIS launchers either, but 4 > 1.

I'm mostly worried about the internals. I have no idea what it would take to prep the gun for a top-of-the-line battery and super stiff spring, or even if it's the right base gun to make a super-pwnzr out of.

(in a Bill Nye voice) Consider the following

If one of those launchers weighs say 5 pounds multiiply by four and you have 20 pounds on a probally 10 pounds gun with a 2 pound site Which you can use even with the riser so overall you have a weapon that weighs more than a SAW. Not to mention you look like a freaking retard with four grenades launchers. don't forget you have added no shells so you have all that and not a sinlge shell. 115X4=460 dollars more than the weapon. If you bought one you could buy uber ammounts of shells. Overall an extremly bad idea gun scope launcher and other stuff done.

Soooo...

It'll need a bipod?

Omega Lambda wrote:

Soooo...

It'll need a bipod?

not even man, like theres no way you'll always lay down or have cover to put it on so its just redicoulsly not possible.

"Also in a Bill Nye the science guy voice (kudos to Satan for saying that (sadly I have to watch those videos in science class ))."

4 Grenade launchers, 20 pounds.
7 Pound Gun.
27 Pound gun.
Full Box Mag 5000 rounds. 3-5 pounds.


So far thats 32 pounds...
Add Optics and other toys...
33-35 pounds...

Also consider, how are you going to put a fourth m203?
One on bottem, left, right, and top?
The bb's would hit the triangle sight. The riser wouldn't rise the red dot over it...


This one i'm not sure about...
But don't m203 bb's go downward?
Shoot it from the left, the bb's curve left, shoot it from the right, the bb's curve right yes?

Not sure about that, I guess the launchers can be for close quarters. And we could always get 2 or 3 risers for the scope. And maybe a 3-point sling to help hold it.

You are kidding me.
Let me go on by saying in no way, am I trying to be aggressive, but you would be hard core if you used that spring.
That spring.
Will crack your gearbox.
Break your piston.
Possibly break your gears...

You would have to upgrade THE WHOLE GEARBOX.
G&G is not enough for a 300% spring...
First of all, why grab a spring that shoots 600 FPS?
Your going to hurt someone, bad, really really bad, as in never wants to play airsoft again bad.

And RELLY? 4 192 bb nades shot at one person, along with a 12 volt lipo battery that is shooting 600 FPS? Considering even if the battery will shoot that fast considering how much battery must be used to turn the spring...

Your going to not only need those, but tons more stuff to use a 300% spring...

Metal Bushings, find really good ones...
High Torque gears, High torque Motor, Proper shimming job, Reinforced Gearbox...
Tons more too...
Please for the love of sake, 4 m203s hurt enough, but 600 FPS?

A three point sling might break... (Poor cheap ones though, you'll need a military grade to carry that...)

Two or three risers will make the red dot pretty inaccurate...

Omega Lambda wrote:

Yeah, with 4 launchers, the box mag is kind of obligatory. And come on, 4 rails, 4 launchers? Makes sense to me. If I didn't need 4, I wouldn't use RIS launchers either, but 4 > 1.

I'm mostly worried about the internals. I have no idea what it would take to prep the gun for a top-of-the-line battery and super stiff spring, or even if it's the right base gun to make a super-pwnzr out of.

You need a good target. For something in your case around 30-40 RPS would be acceptable. Just remember if you up the RoF make sure the spring is stiff enough so it returns fast enough so the sector gear only contacts the catch tooth. If it doesn't....you just strip piston after piston after piston until you figure it out.

I am sorry, But do you realize how much of a HOMO you will look like if you show up to a game with 4 risers, and 4 M203's mounted to your gun. I would laugh at you sooooooo much. Think about this a little, go and build the gun on one of those dream gun apps.

Hey now, let's not call my orientation into question. "This is not a serious suggestion, this is in jest, I'm posting this at midnight, please treat it as such." I'm just looking into how much you could possibly load onto a gun. It's completely impractical, but that's the point, and is why it's here and not in the main forums.

Other than the fact 4 grenade launchers with risers is kind of...GAY it would make your gun so front heavy there is no point. You would be better off making a CO2 cannon with a attached short range launcher. Go on you tube and look up "Cocking Tube Airsoft Grenade Launcher"

The weight thing is reaaaaally off.

M16=1337 pounds....
203='just meh' pounds
shells=14 pounds a piece
scope=240 ounces
bayonet=1KG

This means your gun will weight OVER 9000 POUNDS!1!1!!!one shift11!111!!!!11!



sticks

OVER 9000??????????????????? ^This right here is an oldfag, I can tell. Anon is everywhere.

But is there any gun that can take that spring out-of-the-box?

TheOneNamedMike wrote:

That spring.
Will crack your gearbox.
Break your piston.
Possibly break your gears...

No, that spring will shoot the cylinder out the front of the gun.

But... Are you really going to buy this stuff?

maybe a KWA. or a systema PTW. those are the only I could think of that could handle that spring stock.

Why is this thread even open?